Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 14
th
, 2024, 7:20pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Mixed-Signal Design
› MIDAS simulation
‹
Previous topic
|
Next topic
›
Pages: 1
MIDAS simulation (Read 2374 times)
c.h.zheng
New Member
Offline
Posts: 6
MIDAS simulation
Dec 18
th
, 2005, 10:49pm
hi all:
can you gave me some advice aout MIDAS(mixed signal simulation),thanks
Back to top
IP Logged
ywguo
Community Fellow
Offline
Posts: 943
Shanghai, PRC
Re: MIDAS simulation
Reply #1 -
Jan 10
th
, 2006, 3:03am
Hi, Zheng,
It is too general for others to give you a help. You'd better ask a more concrete questioin, for eg., I need a mixed signal simulator to study the stability of a PLL.
Yawei
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
»» Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.