Designer’s Guide Community

hzieexwj New Member Offline Posts: 3 hz,china	surface-potential model-help Apr 13^th, 2006, 7:17am my teacher give me an assignment to learn sth about sp model. who can give me some materials about it ? thank you!
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: surface-potential model-help Reply #1 - Apr 19^th, 2006, 11:12pm Look at the Modeling link on the Designer's Guide site (yes, this site): http://www.designers-guide.org/Modeling/ - it has links to information about the PSP model. Regards, Andrew.
Back to top	IP Logged

hzieexwj New Member Offline Posts: 3 hz,china	Re: surface-potential model-help Reply #2 - Apr 20^th, 2006, 12:30am i have download the materials through the links on your site. thank you.
Back to top	IP Logged

mikki33 Community Member Offline Analog/Mixed Signal/High Speed Posts: 57 Israel	Re: surface-potential model-help Reply #3 - May 18^th, 2006, 4:29am It was 2 presentation about surface-potential modeling at ICECS-2004 (Intnl. Conf. on Electronics, Circuits and Systems). If you can't find the proceedings, leave me PM with you e-mail, I'll send you these presentations. Or look for "Daniel Foty" together with "Gilgamesh Associates" in the Internet Best, Michael
Back to top	If you don't have time to do it good you will find time to do it again IP Logged

Geoffrey_Coram Senior Fellow Offline Posts: 1999 Massachusetts, USA	Re: surface-potential model-help Reply #4 - May 18^th, 2006, 10:09am I don't believe Foty is actually involved in the development of any of the sp-based models. I would instead recommend papers by Gildenblat or Klaassen (PSP) or Miura-Mattausch (HiSIM), some of which were presented at the Workshop on Compact Modeling (http://www.ntu.edu.sg/home/exzhou/WCM/)
Back to top	If at first you do succeed, STOP, raise your standards, and stop wasting your time. IP Logged

hzieexwj New Member Offline Posts: 3 hz,china	Re: surface-potential model-help Reply #5 - May 24^th, 2006, 11:56pm Thank you all bove! i have read some papers about psp. it will take me some time to be familiar with psp. althou i don't know the key point of psp , i will go on
Back to top	IP Logged

mikki33

Community Member

Offline

Analog/Mixed
Signal/High Speed

Posts: 57
Israel

Re: surface-potential model-help
Reply #6 - May 25^th, 2006, 12:32am

Geoffrey,

you are right, Daniel Foty is not involved into the development, but he is SELLING the models and simulations approaches. So, from his presentations it is possible to understand what he is selling. Addition to that he is an interesting guy, and fun to speak with. I enjoyed the presentations and conversation.

Michael

Back to top

If you don't have time to do it good
you will find time to do it again

IP Logged

Geoffrey_Coram Senior Fellow Offline Posts: 1999 Massachusetts, USA	Re: surface-potential model-help Reply #7 - May 25^th, 2006, 4:37am How can he sell a public-domain model (PSP)??
Back to top	If at first you do succeed, STOP, raise your standards, and stop wasting your time. IP Logged

mikki33 Community Member Offline Analog/Mixed Signal/High Speed Posts: 57 Israel	Re: surface-potential model-help Reply #8 - May 25^th, 2006, 4:52am It's a good question. I nether thought about it...
Back to top	If you don't have time to do it good you will find time to do it again IP Logged