Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 17
th
, 2024, 7:15pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Mixed-Signal Design
› question in opamp design in sigma delta modulator
‹
Previous topic
|
Next topic
›
Pages:
1
2
question in opamp design in sigma delta modulator (Read 3484 times)
sheldon
Community Fellow
Offline
Posts: 751
Re: question in opamp design in sigma delta modula
Reply #15 -
May 06
th
, 2006, 7:57pm
Glacier,
Just for completeness, there is also some additional information at:
Sigma-Delta ADC Priciples and Architectures
http://www.imse.cnm.es/esd-msd/WORKSHOPS/MIXMODEST/PRESENTATIONS/LPSDM_Architect...
Errors in Sigma-Delta ADC
http://www.imse.cnm.es/esd-msd/WORKSHOPS/MIXMODEST/PRESENTATIONS/LPSDM_Errors_v2...
Design Example:
http://www.imse.cnm.es/esd-msd/WORKSHOPS/MIXMODEST/PRESENTATIONS/medeiro1_exerci...
In particular, the error presentation discusses the relationship between different design
parameters, for example, open loop gain, and ADC performance.
Best Regards,
Sheldon
Back to top
IP Logged
glacieryy
Junior Member
Offline
Posts: 22
Re: question in opamp design in sigma delta modula
Reply #16 -
May 9
th
, 2006, 2:57am
Sheldon ,
Thanks a lot for your help.
These documents are really very useful.
Thank you again.
Best wishes.
glacier
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
»» Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.