The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 31st, 2024, 8:20pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Semiconductor Devices › Spectre modelling of a photodiode
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Spectre modelling of a photodiode (Read 2942 times)
MK
New Member
*
Offline



Posts: 7
Spectre modelling of a photodiode
Jul 31st, 2006, 9:40am  
Hi, does anyone have any suggestions on how to model a photodiode in Spectre.  I am currently using an ideal current source, however, it is not the most accurate and useful model.

Thanks.
Back to top
 
 
View Profile   IP Logged
sheldon
Community Fellow
*****
Offline



Posts: 751
Re: Spectre modelling of a photodiode
Reply #1 - Aug 4th, 2006, 11:11pm  
MK,

  Have you considered writing a behavioral model in Verilog-A?
Verilog-A would even allow you to handle cross-domain effects,
such as quantum efficiency.

                                                              Best Regards,

                                                                 Sheldon
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.