Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

Test Plan for AMS (Read 1948 times)

rahul_iitkgpvlsi

New Member

Offline

Posts: 2
IIT Kgp

Test Plan for AMS
Sep 06^th, 2006, 2:48am

Hi,
I'm going to develop a test plan to test the Controller Block of Synchronous DC DC Buck converter driven by MOS gates.The controller has analog and digital both the module. I need to generate the test bench for this controller automatically depending on the given behavioral modelling of the controller.Could you plz provide me any idea so that I can proceed and the test plan should cover all the faults.....?

Regards,

Rahul

IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: Test Plan for AMS Reply #1 - Sep 7^th, 2006, 9:08am Why don't you start with a detailed performance product specification of a similar product, and develop testing to cover all the specification parameters in there? Lots of these type of converters out there, and it serves as a reasonable starting point.
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

Pages: 1

‹ Previous topic | Next topic ›