The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 11:30pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › time for PSS
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
time for PSS (Read 1892 times)
chungmnig
Community Member
***
Offline



Posts: 37
time for PSS
Sep 23rd, 2006, 9:45pm  
Hi~~
i simulate sigma delta's noise using PSS & Pnoise analysis
my circuit has two clock , 1.28MHz for sampling clock ,32KHz for chopper amplifier.
So my PSS analysis is 31.25us for tstab , 31.25us for beat period.
But the simulation time is so long ,and need many memory (i have using swap file)
so i wonder is it has any method to accelerate the simulation?
thanks~~!!
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.