The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 20th, 2024, 4:16am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › NOIMOD @ Moderate Inversion
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
NOIMOD @ Moderate Inversion (Read 1146 times)
Erez_Sarig
Junior Member
**
Offline



Posts: 16
NOIMOD @ Moderate Inversion
Sep 27th, 2006, 1:20am  
Hello,
When my Transistor is in Moderate Inversion (Vgs-Vt)=50mV, What is the right parameter for NOIMOD ?
(NOIMOD=3 uses 8/3KTgm.... & NOIMOD=1 uses ABS(qinv)....)

Thanks
Erez
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.