Andrew Beckett
Senior Fellow
![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif)
Offline
![](https://designers-guide.org/forum/avatars/elmerfudd.gif)
Life, don't talk to me about Life...
Posts: 1742
Bracknell, UK
|
Most Physical verification tools allow this. Diva, Assura, Dracula do, and I'm sure others can too.
After all, LVS is a matter of extracting a netlist from layout, and then comparing that netlist against a schematic netlist. So schematic vs schematic is just a subset of what LVS normally has to do.
Regards,
Andrew.
|