The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 18th, 2024, 1:12am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › phase noise saturation frequency??
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
phase noise saturation frequency?? (Read 2612 times)
Aigneryu
Senior Member
****
Offline



Posts: 102
phase noise saturation frequency??
Nov 28th, 2006, 11:53am  
Hi,

 I try to simulate the phase noise with very low offset frequency, say, below 1k. And the simulator gave a message like
"The estimated phase-noise saturation frequency is 1.65xxxe+3 Hz"

Is this frequency standing for the bandwidth for the lorenzian power spectrum?
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: phase noise saturation frequency??
Reply #1 - Nov 28th, 2006, 2:47pm  
I believe so.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.