The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 7th, 2024, 6:12am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › model file inclusion with .lib in Synopsys HSPICE
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
model file inclusion with .lib in Synopsys HSPICE (Read 1620 times)
cmosa
New Member
*
Offline



Posts: 9
IIT
model file inclusion with .lib in Synopsys HSPICE
Mar 13th, 2007, 12:44am  
Does model selector that selects one of the different models given in file , turns on in HSPICE whenever model file is included with .lib command ?  Do we have to give any extra commmand to turn on this selector  ?



Back to top
 
 
View Profile   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: model file inclusion with .lib in Synopsys HSP
Reply #1 - Mar 15th, 2007, 6:19am  
I've no idea what you're actually asking here. You might want to rephrase it (unless it's just me?)

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.