Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Sep 18^th, 2024, 7:19am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Mixed-Signal Design › How to carry out the test op-amp??

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

How to carry out the test op-amp?? (Read 1116 times)

kim57 New Member Offline Posts: 6	How to carry out the test op-amp?? Apr 16^th, 2007, 1:58am Hello, Sorry to trouble again.. my supervisor asked me to carry out the following simulation to test an op-amp. but i have no idea how to do that.. anyone can help?? i need to do 1: DC open loop gain phase 2: Noise analysis 3: DC offset 4: DC current consumption 5: Slew rate 6: CMRR 7: PSRR for VDD and VSS thanks for helping me
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: How to carry out the test op-amp?? Reply #1 - Apr 16^th, 2007, 3:49am Why don't you ask your supervisor, since it sounds as if you need some supervision? Andrew.
Back to top	IP Logged

sheldon Community Fellow Offline Posts: 751	Re: How to carry out the test op-amp?? Reply #2 - Apr 17^th, 2007, 11:48pm Kim, The following links may provide some useful information, http://www.cadence.com/whitepapers/FVofDiffOpAmp_wp.pdf http://engr.smu.edu/orgs/ssc/slides/20001215b.pdf
Back to top	IP Logged

smarty Community Member Offline Posts: 46	Re: How to carry out the test op-amp?? Reply #3 - Apr 27^th, 2007, 2:20am Hi Kim, Check out the following. This might be of help to you. www.mrc.uidaho.edu/mrc/people/harry/ee415/class_handouts/two_stg_char.pdf Regards, SBR
Back to top	IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: How to carry out the test op-amp?? Reply #4 - May 23^rd, 2007, 6:01pm Some good textbooks on the shelf are suggested - Start gathering books on the subject of analog IC design. Also, local university courses, or industry training seminars. (I teach this stuff, where are you at? Email me)
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

batistuta New Member Offline Posts: 1	Re: How to carry out the test op-amp?? Reply #5 - Jul 4^th, 2007, 3:49am hi, loose-electron, i also need this mannual or information about opamp simulation,can you E-mail me?? dongff1982@163.com thanks. batistuta
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.