Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 17
th
, 2024, 11:14pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› how to do simulation for divide by 128/129 divider
‹
Previous topic
|
Next topic
›
Pages: 1
how to do simulation for divide by 128/129 divider (Read 1786 times)
Jagdish
New Member
Offline
Posts: 1
how to do simulation for divide by 128/129 divider
Apr 27
th
, 2007, 6:38am
i want to simulation for divide by 128/129 counter
and want to see its power spectral density how it look can any one help me on this topic
i am having problem in choosing voltage source for that simulation
its giving an error when i do Qpss analsis ... it saying missing fund some thing like this
Back to top
IP Logged
rf_man
Junior Member
Offline
Posts: 28
Re: how to do simulation for divide by 128/129 div
Reply #1 -
May 1
st
, 2007, 5:47am
Just use PSS simulation, set the fundamental frequency as the output frequency of the divider. Check the results in spectrum domain. QPSS simulation is not needed.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.