The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 17th, 2024, 9:16pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › how to do simulation for divide by 128/129 divider
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to do simulation for divide by 128/129 divider (Read 1784 times)
Jagdish
New Member
*
Offline



Posts: 1
how to do simulation for divide by 128/129 divider
Apr 27th, 2007, 6:38am  
i want to simulation for divide by 128/129 counter
and want to see its power spectral density  how it look can any one help me on this topic
i am having problem in choosing voltage source for that simulation

its giving an error when i do Qpss analsis ... it saying missing fund some thing like this
Back to top
 
 
View Profile   IP Logged
rf_man
Junior Member
**
Offline



Posts: 28
Re: how to do simulation for divide by 128/129 div
Reply #1 - May 1st, 2007, 5:47am  
Just use PSS simulation, set the fundamental frequency as the output frequency of the divider. Check the results in spectrum domain. QPSS simulation is not needed.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.