The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Nov 1st, 2024, 1:11am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Equivalent capacitance by T-structures
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Equivalent capacitance by T-structures (Read 1978 times)
coolwing
New Member
*
Offline



Posts: 2
Equivalent capacitance by T-structures
May 21st, 2007, 5:45am  
Hi All:
        I had a simple question about equivalent capacitance by T-structures. Why the equivalent capacitance CT given by CT = (CT1*CT3)/(CT1+CT2+CT3)? Can you help me ? THX!! Cry Cry
Back to top
1_001.JPG  
 
1_001.JPG
View Profile   IP Logged
ACWWong
Community Fellow
*****
Offline



Posts: 539
Oxford, UK
Re: Equivalent capacitance by T-structures
Reply #1 - May 21st, 2007, 6:42am  
Its the star-delta transform.
try wikipedia: http://en.wikipedia.org/wiki/Star_Delta
or other electronics book for information.
Back to top
 
 
View Profile   IP Logged
coolwing
New Member
*
Offline



Posts: 2
Re: Equivalent capacitance by T-structures
Reply #2 - May 21st, 2007, 8:07pm  
Hi ACWWong:
                   Many thanks for your kindly suggestion.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.