Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Sep 17
th
, 2024, 6:23pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Mixed-Signal Design
› phase off set in pfd-Charge pump
‹
Previous topic
|
Next topic
›
Pages: 1
phase off set in pfd-Charge pump (Read 1898 times)
manisms
Junior Member
Offline
Posts: 17
phase off set in pfd-Charge pump
May 21
st
, 2007, 10:06pm
can u please explain the phase offset in pfd-charge pump
and how i measure in cadence tool..\
please give me any doc thesis and realted material
regards
Back to top
IP Logged
adesign
Community Member
Offline
Posts: 73
Re: phase off set in pfd-Charge pump
Reply #1 -
May 22
nd
, 2007, 10:27pm
Go through the Gardner paper at
http://ieeexplore.ieee.org/iel5/8159/23921/01094619.pdf
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
»» Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.