The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 18th, 2024, 7:27am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › question on adding a network between lna,mixer
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
question on adding a network between lna,mixer (Read 1353 times)
James Bond
Community Member
***
Offline



Posts: 82
question on adding a network between lna,mixer
Jul 05th, 2007, 10:22am  
Hi, all

If a on-chip impedance network is added between lna and passive mixer to compensate conversion loss of mixer. How should I decide the input impedance for this network?

Thank you very much.
Best Regards
James
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.