Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 21^st, 2024, 6:01am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › AMS Simulators › Eldo with AMS-designer

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Eldo with AMS-designer (Read 4149 times)

Pavel Senior Member Offline Posts: 174 Lausanne/Switzerland	Eldo with AMS-designer Jul 30^th, 2007, 7:43am Hello Is it possible to use Eldo as analog simulator in AMS-designer? Regards. Pavel.
Back to top	IP Logged

Ken Kundert Global Moderator Offline Posts: 2384 Silicon Valley	Re: Eldo with AMS-designer Reply #1 - Jul 30^th, 2007, 11:15am No. AMS Designer combines NCsim and either Spectre or Ultrasim, all Cadence products. Mentor provides AdvanceMS, which combines Eldo and ModelSim. -Ken
Back to top	IP Logged

Pavel Senior Member Offline Posts: 174 Lausanne/Switzerland	Re: Eldo with AMS-designer Reply #2 - Jul 31^st, 2007, 2:23am Thanks Ken, Can AdvanceMS read Virtuoso Schematics? Regards Pavel.
Back to top	IP Logged

ACWWong Community Fellow Offline Posts: 539 Oxford, UK	Re: Eldo with AMS-designer Reply #3 - Jul 31^st, 2007, 3:17am ADMS can plug directly into the ADE (Virtuoso) environment, but I think you'll need an Oasis license from Cadence. Oasis provides a socket for the ADMS, Eldo, EldoRF etc to plug into... although I'm not sure exactly what it does to the spectre netlists...
Back to top	IP Logged

Pavel Senior Member Offline Posts: 174 Lausanne/Switzerland	Re: Eldo with AMS-designer Reply #4 - Jul 31^st, 2007, 8:22am Ok, thanks.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.