The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jun 16th, 2024, 11:32am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › What are these error from LVS: psub_StampErrorMult
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
What are these error from LVS: psub_StampErrorMult (Read 2871 times)
DoYouLinux
Community Member
***
Offline



Posts: 80
What are these error from LVS: psub_StampErrorMult
Oct 16th, 2007, 11:41am  
Hi all,

I tried to run LVS, but I had found the following error messages:

psub_StampErrorMult

psub_StampErrorConnect

Can they be neglected or do we need to set some thing in LVS window (I use Assura) ?
Back to top
 
 
View Profile   IP Logged
didac
Senior Member
****
Offline

There's a million
ways to see the
things in life

Posts: 247
manresa,spain
Re: What are these error from LVS: psub_StampError
Reply #1 - Oct 17th, 2007, 9:06am  
Hi,
Have you checked that you have contacts to the p_substrate and to the nwells?,and if you are doing a custom layout check that nwells exists around the transistors.
Hope it helps,
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.