The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jun 16th, 2024, 10:49am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › RF pad with ESD protection for UMC-0.18um process
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
RF pad with ESD protection for UMC-0.18um process (Read 1993 times)
DoYouLinux
Community Member
***
Offline



Posts: 80
RF pad with ESD protection for UMC-0.18um process
Nov 20th, 2007, 8:51am  
Hi all,

I am designing a chip for an RF application (5 GHz) using 0.18-um process from UMC and I am wondering about the pads I need to use.

Since I need RF pads with ESD protection, does anyone know about any vendor who provides RF pads for UMC 0.18-um process ?

Thank you very much in advance,

DYL  ;)
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.