Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Sep 28
th
, 2024, 7:10am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Analog Design
› SC filter implementation problem
‹
Previous topic
|
Next topic
›
Pages: 1
SC filter implementation problem (Read 1774 times)
rampat
Junior Member
Offline
Posts: 14
SC filter implementation problem
Dec 19
th
, 2007, 12:06am
HI all,
0.49496 (z-0.999) (z-0.9973)
I have z-domain transfer fucntion H(z)= ---------------------------- .I want implement it using SC biquad filters in VLSI.But the problem
(z-1) (z-0.9777)
is ,since all zeros and poles are very close it each so the system is very sensitive cap ratios in the sc filter implementation and also max capacitor spread=88 .Can anyone please stress on the criticality of the system or where else can I implement this system which is less sensitive?How can I reduce the cap spread?
regards
rampat
Back to top
IP Logged
Berti
Community Fellow
Offline
Posts: 356
Re: SC filter implementation problem
Reply #1 -
Dec 19
th
, 2007, 10:55pm
Hi,
The implementation H(z) might indeed be problematic.
I think you should start optimizing at system level, not circuit level.
Do you really need a transfer function like this? Or is there an other,
roboust solution.
Regards
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
»» Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.