The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 10:11pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › CDF parameters are not recogniszed by verilog cell
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
CDF parameters are not recogniszed by verilog cell (Read 3560 times)
rajdeep
Senior Member
****
Offline



Posts: 220
UK
CDF parameters are not recogniszed by verilog cell
Dec 20th, 2007, 2:59am  
Hi all,

After I add CDF parameters for verilog cells, the parameters are visible when I press 'q' on any instance
of the cell. But during netlisting it is ignoring those parameters, and hence the simulation result is also not what I'm
expecting.

Can anyone tell me how to get rid of this problem?

Rajdeep
Back to top
 
 
Design is fun, verification is a requirement.
View Profile   IP Logged
rajdeep
Senior Member
****
Offline



Posts: 220
UK
Re: CDF parameters are not recogniszed by verilog
Reply #1 - Dec 24th, 2007, 4:31am  
Well, this problem is solved. This site was useful. http://www.ece.uci.edu/eceware/cadence/compveruser/chap9.html#1016249

One has to add a property named hnlVerilogCDFdefparamList by using the SKILL function dbCreateProp.

Thanks,
Rajdeep
Back to top
 
 
Design is fun, verification is a requirement.
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.