The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 9:18pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › PXF Pnoise
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
PXF Pnoise (Read 2925 times)
aaron_do
Senior Fellow
******
Offline



Posts: 1398
PXF Pnoise
Jan 21st, 2008, 11:55pm  
Hi,

just to check, does the Pnoise transfer function give the same result as the PXF (assuming the same sideband is selected)?

thanks,
Aaron
Back to top
 
 
there is no energy in matter other than that received from the environment - Nikola Tesla
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: PXF Pnoise
Reply #1 - Jan 22nd, 2008, 1:23am  
Yes.
Back to top
 
 
View Profile WWW   IP Logged
aaron_do
Senior Fellow
******
Offline



Posts: 1398
Re: PXF Pnoise
Reply #2 - Jan 22nd, 2008, 6:26am  
thanks.

in that case there's definately something wrong with my setup. My PXF analysis is giving a completely different answer from the Pnoise analysis.
Back to top
 
 
there is no energy in matter other than that received from the environment - Nikola Tesla
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.