Designer’s Guide Community

Pages: 1

Verilog-A implementation of thermal time constant (Read 2275 times)

ajamaritu New Member Offline Posts: 2	Verilog-A implementation of thermal time constant Jan 23^rd, 2008, 1:59pm if anyone could help , if you know anything about the Verilog-A implementation of thermal time constant in MOS models(BSIM3, MOS9,MOS11 etc)
Back to top	IP Logged

marekm

New Member

Offline

Posts: 8

Re: Verilog-A implementation of thermal time const
Reply #1 - Jan 23^rd, 2008, 2:40pm

I don't know if there are any of those models implemented with self-heating in Verilog-A, but it is relatively easy to do. The VBIC model (on this site http://www.designers-guide.org/VBIC/index.html) has self-heating. The method (a thermal RC circuit driven by a current that represents the power dissipated by the device) is the same.

Marek Mierzwinski

IP Logged

ajamaritu New Member Offline Posts: 2	Re: Verilog-A implementation of thermal time const Reply #2 - Jan 24^th, 2008, 8:59am Hi Marek, thanks a bunch. that should be helpful.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›