The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 19th, 2024, 11:38am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › Associate a schematic component with layout comp.
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Associate a schematic component with layout comp. (Read 2192 times)
ggnhdk
New Member
*
Offline



Posts: 5
Associate a schematic component with layout comp.
Mar 25th, 2008, 3:28am  
Hello,

I'm designing a mixer and I made all my simulations with one transistor which doesn't have a layout view. Now I have to replace this transistor in the layout with another one which has only a layout view.
How can I link the transistor of the schematic with the transistor of the layout ? I don't find the option under Cadence.
Thanks.
Back to top
 
 
View Profile   IP Logged
Ian
Junior Member
**
Offline



Posts: 27
Re: Associate a schematic component with layout co
Reply #1 - Apr 21st, 2008, 6:51am  
I don't know whether I understand your problem fully,
how about in the schematic window trying "Tools"--> "Design Synthesis"--> "Layout XL",
and then copy the available layout into that new window?

Ian
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.