Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 18
th
, 2024, 12:24pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› Offset-PLL
‹
Previous topic
|
Next topic
›
Pages: 1
Offset-PLL (Read 2313 times)
Faisal
Community Member
Offline
Posts: 90
Offset-PLL
Jun 10
th
, 2008, 8:15am
Hi,
I am exploring an Offset-PLL architecture. From the circuit point of view, what are the issues that occur when we put a mixer inside...Any special precautions that one has to do in addition to normal PLL ?
Kind Regards,
Faisal Mateen.
Back to top
IP Logged
buddypoor
Community Fellow
Offline
Posts: 529
Bremen, Germany
Re: Offset-PLL
Reply #1 -
Jun 11
th
, 2008, 6:47am
Hello Faisal,
perhaps the attached document can be helpful for you; if not - waste it.
Back to top
OFFSETPLL.pdf
LvW (buddypoor: In memory of the great late Buddy Rich)
IP Logged
Faisal
Community Member
Offline
Posts: 90
Re: Offset-PLL
Reply #2 -
Jun 11
th
, 2008, 12:49pm
Thanks, its good for a start :)
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.