Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 18^th, 2024, 6:45am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Measurements › RF Measurements › Balun

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Balun (Read 7865 times)

ali.m New Member Offline Posts: 6 Singapore	Balun Jun 11^th, 2008, 1:38am Hi: I am wondering if any one knows 24GHz Balun (Part Number) for Measurement? Regards Ali
Back to top	IP Logged

pancho_hideboo Senior Fellow Offline Posts: 1424 Real Homeless	Re: Balun Reply #1 - Jun 11^th, 2008, 7:51pm ali.m wrote on Jun 11^th, 2008, 1:38am: I am wondering if any one knows 24GHz Balun (Part Number) for Measurement? What value for low frequency do you need ?
Back to top	Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!! http://www7.plala.or.jp/ungeromeppa/flash/kita.html http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related IP Logged

ali.m New Member Offline Posts: 6 Singapore	Re: Balun Reply #2 - Jun 11^th, 2008, 8:36pm Hi Pancho: The lower the better but few MHz would do too. Ali
Back to top	IP Logged

pancho_hideboo Senior Fellow Offline Posts: 1424 Real Homeless	Re: Balun Reply #3 - Jun 12^th, 2008, 12:02am The followings might be useful although they are not completely matched to your needs. http://www.krytar.com/html/180deg.htm http://www.picosecond.com/product/category.asp?pd_id=11
Back to top	Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!! http://www7.plala.or.jp/ungeromeppa/flash/kita.html http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related IP Logged

ali.m New Member Offline Posts: 6 Singapore	Re: Balun Reply #4 - Jun 12^th, 2008, 12:37am Hi Pancho: Thanks for your quick answer.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.