The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 7th, 2024, 12:49am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › IIP3 and distortion of filter
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
IIP3 and distortion of filter (Read 3362 times)
manodipan
Community Member
***
Offline



Posts: 83
IIP3 and distortion of filter
Jun 17th, 2008, 9:36am  
Hi friends,
I want to calculate IIP3,distortion and noise of a filter from transient response ,how it is possible??can u guys give me some reference??Thanks in advance..
Back to top
 
 
View Profile   IP Logged
James Bond
Community Member
***
Offline



Posts: 82
Re: IIP3 and distortion of filter
Reply #1 - Jun 22nd, 2008, 1:16am  
can't you use pss simulatoin to find out thd and ip3?
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: IIP3 and distortion of filter
Reply #2 - Jun 23rd, 2008, 12:40pm  
This is typically done with PSS tests in Specre-RF and two sinusoid tones to find the IM products.

For more details RTFM on IM testing in any RF design book or the Spectre RF manual as well.
-Jerry
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.