Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Oct 31^st, 2024, 5:04am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › Reference for chopping and DEM

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Reference for chopping and DEM (Read 929 times)

AnalogDE Senior Member Offline Posts: 137	Reference for chopping and DEM Sep 15^th, 2008, 11:42pm Could somebody suggest some good references for chopping and DEM? Thanks in advance.
Back to top	IP Logged

Berti Community Fellow Offline Posts: 356	Re: Reference for chopping and DEM Reply #1 - Sep 17^th, 2008, 1:28am DEM for Delta-Sigma modulators? Take a look at: Yves Geerts et al., Design of Multi-Bit Delta-Sigma A/D Converters, Kluwer. Cheers
Back to top	IP Logged

wave Senior Member Offline Posts: 117 Silicon Valley	Re: Reference for chopping and DEM Reply #2 - Sep 18^th, 2008, 12:49pm Kofi Makinwa at Univ. of Delft has done some interesting work in precision Temperature sensors.
Back to top	IP Logged

HdrChopper Community Fellow Offline Posts: 493	Re: Reference for chopping and DEM Reply #3 - Sep 18^th, 2008, 6:11pm Hi, The basics for chopper amplifiers you can find them in "Circuit techniques for reducing the opamp imperfections" C. Enz. Proceedings of the IEEE, VOL.84 No 11, Novemember 1996 This should be your starting point. Tosei
Back to top	Keep it simple IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.