The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 22nd, 2023, 8:26am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › how to measure the out psd by spectreRF
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to measure the out psd by spectreRF (Read 2381 times)
Lilylily
Junior Member
**
Offline



Posts: 15
how to measure the out psd by spectreRF
Sep 16th, 2008, 8:22pm  
Hi,I'm designing a pa.I want to know the out psd of it and the bandwidth is 3G-10G.Would you like to tell me how to do that by spectreRF? Thanks!  ::)
Back to top
 
 
View Profile Lilylily   IP Logged
RFICDUDE
Community Fellow
*****
Offline



Posts: 323
Re:  how to measure the out psd by spectreRF
Reply #1 - Sep 17th, 2008, 7:15pm  
What is the stimulus signal?
Do you want to apply a 3GHz - 10GHz input signal and look at the output signal, or do you want to look at narrower band signals over that band?
Back to top
 
 
View Profile   IP Logged
Lilylily
Junior Member
**
Offline



Posts: 15
Re:  how to measure the out psd by spectreRF
Reply #2 - Sep 18th, 2008, 12:17am  
Yes,the input signal's bandwidth is 3GHz-10Ghz.And i want to see the output signal's power density over that band.Thanks!
Back to top
 
 
View Profile Lilylily   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2023 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.