The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 17th, 2024, 7:20am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › RF Design › Transmisson/Channel bandwidth
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Transmisson/Channel bandwidth (Read 1981 times)
Berti
Community Fellow
*****
Offline



Posts: 356
Transmisson/Channel bandwidth
Sep 25th, 2008, 11:54pm  
Hi all,

What is the difference between transmission and channel bandwidth?
I refer to UMTS-LTE, where the channel bandwidth is e.g. 1.4MHz, but the transmission bandwidth only 1.25MHz.

Regards
Back to top
 
 
View Profile   IP Logged
Berti
Community Fellow
*****
Offline



Posts: 356
Re: Transmisson/Channel bandwidth
Reply #1 - Sep 26th, 2008, 12:21am  
Sorry guys, I found the answer by myself.

Channel bandwidth: The RF bandwidth supporting a single RF carrier with the transmission bandwidth configured in the UL or DL of a cell.
Transmission bandwidth: Bandwidth of an instantaneous transmission from a UE or BS.

Cheers
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.