didac
Senior Member
![* *](https://designers-guide.org/forum/Templates/Forum/default/stargold.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/stargold.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/stargold.gif)
Offline
![](https://designers-guide.org/forum/avatars/blank.gif)
There's a million ways to see the things in life
Posts: 247
manresa,spain
|
Hi, When you look at an IIP3 simulation/measurement you will see that for medium powers the traces follow a slope of 1 and 3, for higher levels of power the mixer will go to compression. So you must choose an input power level were the slope of 3rd order is still 3 and make a linear extrapolation of the intercept point. Hope it helps,
|