Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 13^th, 2024, 12:45pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › RF Simulators › [q] RFIC package modeler

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

[q] RFIC package modeler (Read 3046 times)

kidhyun Junior Member Offline Posts: 14	[q] RFIC package modeler Feb 13^th, 2009, 7:15am Dear All, I am trying to run RFIC package modeler, but 32520 is EOLed, so I couldn't run. Do we have the same thing in 38520? Is the command the same (pkg) ? Thank You
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: [q] RFIC package modeler Reply #1 - Feb 13^th, 2009, 9:50am pkg has been end-of-lifed for some time. It's still there in IC5141, but has had no enhancements for many years, and is only supported under legacy licenses. It has gone in IC61. Regards, Andrew.
Back to top	IP Logged

kidhyun Junior Member Offline Posts: 14	Re: [q] RFIC package modeler Reply #2 - Feb 14^th, 2009, 12:35am Thank you for the answer. It seems that I need to run allegro package modeler instead. Do you know what's the command to run this? Or do we run this in some simulation environment like icfb? Thank You.
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: [q] RFIC package modeler Reply #3 - Feb 15^th, 2009, 5:18am Yes, that's right - the Allegro package tools are what you'd use instead. There is also the "RF SIP" flow which combines the Allegro package tools with the IC environment. I'm afraid I'm not that familiar with the details, so it's best for you to contact your local Cadence office for more details. Best Regards, Andrew.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.