Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 16
th
, 2024, 2:55pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
AMS Simulators
› multithreading enabled for spectre in AMS?
‹
Previous topic
|
Next topic
›
Pages: 1
multithreading enabled for spectre in AMS? (Read 3561 times)
raftman
Junior Member
Offline
Posts: 11
multithreading enabled for spectre in AMS?
Feb 20
th
, 2009, 1:31pm
Is it possible to enable the multithreading option for spectre while running through AMS (ncsim)?
I've tried including the -mt option under 'additional parameters' in simulator options with no success. The documentation doesn't mention enabling multithreading, so i'd just like a confirmation that it isn't supported in AMS. I presume it's because of the synching between the analog and digital solvers.
thanks!
Back to top
IP Logged
Andrew Beckett
Senior Fellow
Offline
Life, don't talk to
me about Life...
Posts: 1742
Bracknell, UK
Re: multithreading enabled for spectre in AMS?
Reply #1 -
Feb 20
th
, 2009, 11:41pm
This is now supported in IUS82 (IUS8.2s-003). It's covered in a sourcelink.cadence.com solution, number 11532410.
Regards,
Andrew.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
»» AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.