Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

PLL lock-in range and charge pump questions (Read 2096 times)

liletian

Community Member

Offline

Posts: 97
MD

PLL lock-in range and charge pump questions
Apr 20^th, 2009, 8:28am

Hi Guys
I designed a analog PLL which operate in 2GHz with a lock-in range of 100MHz without charge pump. I searched on literature and find out the previous research most of them use digital PLL which has a phase and freqeucny detector. Is there similar idea for analog PLL?
will charge pump increase lock-in range of analog PLL, is there any literatures? Any suggestions on how to improve the lock-in range of PLL?
Thank you so much

IP Logged

mobil Junior Member Offline Posts: 20 Australia	Re: PLL lock-in range and charge pump questions Reply #1 - May 13^th, 2009, 5:29am Locking range is usually your VCO tuning range if your loop bandwidth is not too large. This book should be helpful: J. Rogers, C. Plett, and F. Dai, "Integrated Circuit Design for High-speed Frequency Synthesis".
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›