The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 18th, 2024, 9:34am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › Problem with Assura --> joinableNet
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Problem with Assura --> joinableNet (Read 3480 times)
jona33
New Member
*
Offline



Posts: 1
Problem with Assura --> joinableNet
May 14th, 2009, 8:00am  
Hello,
I use Assura.
For run LVS, i will want to join 2 ground with different name because analogic power and numeric power.

How do you do ? Option joinableNet ? joinNet ?
Thank
Back to top
 
 
View Profile   IP Logged
deepak
New Member
*
Offline



Posts: 4
Re: Problem with Assura --> joinableNet
Reply #1 - Jul 30th, 2009, 3:59am  
you can use joinable net function and then give the name of the nets your want to joint virtually during LVS........ and dont forget to chech that ignore : suffix..


cheers... deepak.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.