Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 4^th, 2024, 2:30pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › Does Assura support hierarchical extraction?

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Does Assura support hierarchical extraction? (Read 4104 times)

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Does Assura support hierarchical extraction? Aug 05^th, 2009, 5:12am Hi, Does Assura support hierarchical extraction? The flatten extraction results a very huge netlist in post-layout simulation. It is a tedious work to find a node in the flatten netlist. Best Regards, Yawei
Back to top	IP Logged

Andrew Beckett Senior Fellow Offline Life, don't talk to me about Life... Posts: 1742 Bracknell, UK	Re: Does Assura support hierarchical extraction? Reply #1 - Aug 15^th, 2009, 7:01am Yes, it does support hierarchical extraction. Regards, Andrew.
Back to top	IP Logged

analogue_guy Community Member Offline Posts: 38	Re: Does Assura support hierarchical extraction? Reply #2 - Dec 16^th, 2010, 3:12am Hi Would you write some hints how to setup hierarchical extraction? BR
Back to top	IP Logged

analogue_guy Community Member Offline Posts: 38	Re: Does Assura support hierarchical extraction? Reply #3 - Dec 17^th, 2010, 8:37am Ok, I applied the RTFM method ...
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.