The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 21st, 2024, 4:27pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › AC simulation for integrate and dump circuit
‹ Previous topic | Next topic ›
Pages: 1 2 
Send Topic Print
AC simulation for integrate and dump circuit (Read 15654 times)
Ken Kundert
Global Moderator
*****
Offline



Posts: 2386
Silicon Valley
Re: AC simulation for integrate and dump circuit
Reply #15 - Sep 28th, 2009, 11:04am  
I suspect it is because your relay is not ideal. Any on resistance will cause the nulls to fill in. You also have the transition between the on and off resistances modifying the sinc2() shape.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Mohammed Omar
Junior Member
**
Offline



Posts: 17
Re: AC simulation for integrate and dump circuit
Reply #16 - Oct 2nd, 2009, 11:25am  
Thanks a lot for the help Ken Smiley
Back to top
 
 
View Profile   IP Logged
Mohammed Omar
Junior Member
**
Offline



Posts: 17
Re: AC simulation for integrate and dump circuit
Reply #17 - Oct 3rd, 2009, 8:27am  
Hi Ken,

I approximated the sampler using an idealized sampler and things work out as predicted quite well. It removed the sinc2(x) of the sample and hold and shows the sinc(x) of the integrate and dump circuit.

Thanks a lot Smiley

Best regards,
Mohammed Omar
Back to top
 
 
View Profile   IP Logged
Pages: 1 2 
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.