Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 15
th
, 2024, 9:25pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› RFIC packaging
‹
Previous topic
|
Next topic
›
Pages: 1
RFIC packaging (Read 2066 times)
aaron_do
Senior Fellow
Offline
Posts: 1398
RFIC packaging
Oct 28
th
, 2009, 8:22pm
Hi,
I want to learn a little bit about RFIC packaging, or maybe just high frequency analog IC packaging issues. Does anybody know any good references?
thanks,
Aaron
Back to top
there is no energy in matter other than that received from the environment - Nikola Tesla
IP Logged
loose-electron
Senior Fellow
Offline
Best Design Tool =
Capable Designers
Posts: 1638
San Diego California
Re: RFIC packaging
Reply #1 -
Oct 29
th
, 2009, 4:36pm
Vendors make available "package models" and RLC and magnetic coupling model sets for most packages -
You also need approximations for the bond wire inductances and down bond models.
Suggest - get a copy of the package model for the QFN package. It's widely used and has vendor models out there. Take a look at whats in the model as a start point.
Back to top
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.