Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 5^th, 2024, 2:38pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Mixed-Signal Design › polyphase filter

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

polyphase filter (Read 2996 times)

engineer.youssef New Member Offline Posts: 1	polyphase filter Nov 12^th, 2009, 10:12pm Hello All, Can anyone provide me with a papers or ideas discussing polyphase filter especially methods of charctrization (like measuring noise). advanced thanks,
Back to top	IP Logged

aaron_do Senior Fellow Offline Posts: 1398	Re: polyphase filter Reply #1 - Nov 15^th, 2009, 3:29am Hi, what are you using the polyphase filter for? Is it at the LO frequency, RF frequency or IF frequency? Or something else altogether? Anyway here's a paper you may want to read. Behbahani, F, et. al., "CMOS mixers and polyphase filters for large image rejection", JSSC, vol. 36, no. 6, June 2001, pp. 873 - 887 cheers, Aaron
Back to top	there is no energy in matter other than that received from the environment - Nikola Tesla IP Logged

raja.cedt Senior Fellow Offline Posts: 1516 Germany	Re: polyphase filter Reply #2 - Nov 16^th, 2009, 12:25am hi, please refer 4th chapter in this thesis. http://www.eecs.berkeley.edu/Pubs/Dissertations/Data/8336.pdf Thanks, Rajasekhar.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.