The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 8:21am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Behavioral Models › IBIS model simulation by HSPICE
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
IBIS model simulation by HSPICE (Read 6880 times)
somisetty
Community Member
***
Offline



Posts: 64
IBIS model simulation by HSPICE
Nov 15th, 2009, 10:41pm  
hi

I am simulating USB Transceiver IBIS model through HSPICE.I have OE for Output enable/disable,SPD for selecting LowSpeed/FullSpeed,SUS to suspend the IO.

Can any one help me how to instantiate the SPD,OE,SUS  control pins in the SP file and run it through HSPICE ?

Thanks
Back to top
 
 
View Profile   IP Logged
milind_tile
New Member
*
Offline



Posts: 2
Re: IBIS model simulation by HSPICE
Reply #1 - Apr 24th, 2010, 9:13am  
Sir,I am also trying ti simulate the similar kind of thing....Can you please send me the code if you have resolved the issue???
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.