The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 20th, 2024, 3:48am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › High-Speed I/O Design › USB 2.0 High Speed Current Driver ...
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
USB 2.0 High Speed Current Driver ... (Read 5590 times)
somisetty
Community Member
***
Offline



Posts: 64
USB 2.0 High Speed Current Driver ...
Dec 21st, 2009, 11:13pm  
Hi,

what would be the load for USB 2.0 High Speed Current Driver for simulating the rise and fall times?

Thanks
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: USB 2.0 High Speed Current Driver ...
Reply #1 - Dec 22nd, 2009, 9:21pm  
hi,
  where you want to check rise and fall (at the pad?)

Thanks,
Rajasekhar.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
supermoment
Senior Member
****
Offline



Posts: 167
Re: USB 2.0 High Speed Current Driver ...
Reply #2 - Mar 27th, 2010, 8:00am  
normally measure eye diagram at TP2/TP3. The load is from chip to PCB & connector.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.