The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 29th, 2024, 3:32am
Pages: 1
Send Topic Print
ESD simulation (Read 2698 times)
tg
Junior Member
**
Offline



Posts: 11

ESD simulation
Nov 07th, 2009, 11:17pm
 
Hi all,
I would like to ru a simulation of a power-rail esd protection (design is already exist). In order to do it correctly I need to create 2KV HBM pulse and 200V MM pulse but not sure about the right way to do it.
Can someone help?
Thanks!

Back to top
 
 
View Profile   IP Logged
Seeker
New Member
*
Offline



Posts: 4

Re: ESD simulation
Reply #1 - Apr 2nd, 2010, 8:51am
 
tg,

You probably don't need this info now but I thought I would reply anyway. For a 2kV HBM pulse, you need to apply a 0-2kV step through a 1.5Kohm resistor in series with a 100pF capacitor between your zapped pads.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.