Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 16
th
, 2024, 2:29pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Mixed-Signal Design
› How to get 50/50 duty cycle clock?
‹
Previous topic
|
Next topic
›
Pages: 1
How to get 50/50 duty cycle clock? (Read 2791 times)
jlee
Community Member
Offline
Posts: 40
How to get 50/50 duty cycle clock?
Feb 25
th
, 2010, 12:36am
As the title, if I have a clock with 10/90 duty cycle, is there any simple method to convert it to 50/50 duty cycle?
Regards
Back to top
IP Logged
eecs4ever
New Member
Offline
Posts: 7
Re: How to get 50/50 duty cycle clock?
Reply #1 -
Feb 25
th
, 2010, 9:04pm
the following circuit will give you a 50/50 duty cycle clock.... but at 1/2 the frequency .
requires a flip-flop and a inverter
Back to top
ck2.jpg
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
»» Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.