The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 6th, 2024, 9:27am
Pages: 1
Send Topic Print
State-space average modelling of converters with parasitics and storage-time.... (Read 4114 times)
somisetty
Community Member
***
Offline



Posts: 64

State-space average modelling of converters with parasitics and storage-time....
Apr 27th, 2010, 2:37am
 
Hi all,

can anyone provide me the below paper? Thanks a lot....

State-space average modelling of converters with parasitics and storage-time modulation
Polivka, W. M.; Chetty, P. R. K.; Middlebrook, R. D.

In: PESC '80; Power Electronics Specialists Conference, Atlanta, Ga., June 16-20, 1980, Record. (A81-32951 14-33) New York, Institute of Electrical and Electronics Engineers, Inc., 1980, p. 119-143. Research sponsored by the IBM Corp.;
The method of state-space averaging is used to extend the models of buck, boost, buck-boost, and Cuk (1977) converters to include the effects of all parasitic resistances and transistor storage-time modulation. The validity of the technique is emphasized through experimental verification of a new effect in the Cuk transformer, a right half-plane zero in the line to output transfer function. Practical consequences of the results obtained are discussed.

Keywords: CHARGE DISTRIBUTION, MATHEMATICAL MODELS, STORAGE STABILITY, SWITCHING CIRCUITS, TIME RESPONSE, VOLTAGE CONVERTERS (DC TO DC), COMPUTERIZED SIMULATION, HALF SPACES, MODULATION, POWER CONDITIONING, STATE VECTORS, TRANSFER FUNCTIONS, TRANSFORMERS, VOLT-AMPERE
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.