The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 18th, 2024, 2:57am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › extraction of irregular shaped MOS transistrors with Assura
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
extraction of irregular shaped MOS transistrors with Assura (Read 43 times)
Andrey
New Member
*
Offline



Posts: 2
Ukraine
extraction of irregular shaped MOS transistrors with Assura
Jun 14th, 2010, 9:11am  
Hello all,

I faced a problem during extraction of round shape MOS transistors.
It looks like Assura see correct width but extracted length is absolutely wrong.  :'(

Is there any chance to make Assura able to extract such structures correctly?

Many thanks in advance  :)
Back to top
round_mos.png  
« Last Edit: Jun 14th, 2010, 11:55pm by Andrey »  
round_mos.png
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: extraction of irregular shaped MOS transistrors with Assura
Reply #1 - Jun 30th, 2010, 10:04pm  
Hi,

I didnt get a chance to use this kind of device till now.
Can you please tell me which foundary and technology will allow us to use this
kind of device.
And if u dont mind please tell me the advantages of these  special type transistors.

Thanks In advance ..
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.