The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 16th, 2024, 9:36am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Behavioral Models › Model for offset of latch
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Model for offset of latch (Read 2837 times)
Parveen
New Member
*
Offline



Posts: 4
Indore
Model for offset of latch
Jul 21st, 2010, 6:17am  
Is there any equivalent model for latch along with its offset????
Or rather, how can we model the offset of a latch????
Back to top
 
 
View Profile   IP Logged
AnalogDE
Senior Member
****
Offline



Posts: 137
Re: Model for offset of latch
Reply #1 - Jul 21st, 2010, 4:12pm  
To model the offset, place a voltage source with value set to the offset in series with the input.
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: Model for offset of latch
Reply #2 - Jul 23rd, 2010, 1:56am  
i guess you are asking abut how to estimate rather how to put simulation...as first order approximation you can use pilgrim coefficients based models. are you locking for this or any thing else?
Thanks,
Rajasekhar.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.