RuRob
New Member
Offline
Posts: 4
|
Hello, I started with the oscillator design, I need an 20MHz oscillator with low jitter, I selected the Pierce Topology, and i'm going to start with the the design and simulation phase.
I have a problem with de simulation phase, because i don't know how i'm going to start this phase, when i'm going to implement the oscillator schematic, i need the circuit equivalent of the crystal, i searched for a Crystal that worked in fundamental mode, with this characteristic, but i can't find the circuit equivalent of the crystal in the datasheets. I don't know if this values are important in the simulation phase.
Anyone have experience with the oscillator design?
|