christon2002
New Member
Offline
Posts: 1
P. R. China
|
Hi, all,
I am drawing the layout of my RF CMOS circuit, but it can not pass the LVS due to the LVS_RF layer(it is only for LVS, as the Design Rule said). If I delete this LVS_RF layer and change the RF MOS to analog MOS in schematic, it can pass the LVS.
So the problem is that, are the RF MOS and analog MOS the same in fabrication(such as doping etc.), and the different is only the model in simulation?
Regards, Christon
|