The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 29th, 2024, 11:15am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › regarding willy sansen book
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
regarding willy sansen book (Read 2877 times)
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
regarding willy sansen book
May 21st, 2011, 4:04am  
hi guys,
I have some doubt in willy sansen book page number 764 first figure.
in that figure he assumed that 1/gm<s*cgs..but i guess it is 1/gm<1/scgs. could you please comment.

Thanks.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
RobG
Community Fellow
*****
Offline



Posts: 570
Bozeman, MT
Re: regarding willy sansen book
Reply #1 - May 21st, 2011, 10:39am  
Yeah, the units need to match up at the very least. Error-free writing is very hard to do.
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: regarding willy sansen book
Reply #2 - May 23rd, 2011, 7:25pm  
That's what the Second Edition is for!
Cheesy
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.