The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 10th, 2024, 3:11am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Mixed-Signal Design › duty cycle corector
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
duty cycle corector (Read 2028 times)
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
duty cycle corector
May 29th, 2011, 10:09pm  
hello all,
I am posting a simple Duty cycle corrector, which seems like very lower and i copied from a jssc paper. But i am not able to understand operation. Can any one please explain its operation clearly or any clear reference for that.

Thanks.
Raj.
Back to top
dcc.png  
 
dcc.png
View Profile WWW raja.sekhar86   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: duty cycle corector
Reply #1 - May 30th, 2011, 6:11pm  
start by drawing out the timing diagram, its a bunch of switches so it should be easy to figure out from the timing diagram.
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.